Cisco Catalyst 250 Series User Manual

PurposeCommand or Action
Specifies the location of the custom HTML file to use
in place of the default login expired page.
ip admission proxy http login expired page file
device:expired-filename
Example:
Switch(config)# ip admission proxy http login
Step 6
expired page file disk1:expired.htm
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 7
Related Topics
Authentication Proxy Web Page Guidelines, on page 367
Specifying a Redirection URL for Successful Login
Follow these steps to specify a URL to which the user is redirected after authentication, effectively replacing
the internal Success HTML page:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip admission proxy http success redirect url-string
4.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password
if prompted.
enable
Example:
Switch> enable
Step 1
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
380 OL-29048-01
Configuring Web-Based Authentication
Configuring the HTTP Server

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English