Cisco Catalyst 250 Series User Manual

PurposeCommand or Action
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 7
startup-config
Related Topics
Configuring VLAN Maps, on page 172
Applying a VLAN Map to a VLAN
Beginning in privileged EXEC mode, follow these steps to apply a VLAN map to one or more VLANs:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
vlan filter mapname vlan-list list
4.
end
5.
show running-config
6.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Switch> enable
Step 1
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Applies the VLAN map to one or more VLAN IDs.
vlan filter mapname vlan-list list
Step 3
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
176 OL-29048-01
Configuring IPv4 ACLs
Applying a VLAN Map to a VLAN

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English