Cisco Catalyst 250 Series User Manual

PurposeCommand or Action
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 8
Monitoring Protected Ports
Table 32: Commands for Displaying Protected Port Settings
PurposeCommand
Displays the administrative and operational status of all
switching (nonrouting) ports or the specified port, including
port blocking and port protection settings.
show interfaces [interface-id] switchport
Where to Go Next
•
Additional References
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
400 OL-29048-01
Configuring Port-Based Traffic Control
Monitoring Protected Ports

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English