Cisco Catalyst 250 Series User Manual

CHAPTER 5
Configuring TACACS+
•
Finding Feature Information, page 39
•
Prerequisites for TACACS+, page 39
•
Information About TACACS+, page 41
•
How to Configure TACACS+, page 45
•
Monitoring TACACS+, page 54
•
Additional References, page 54
•
Feature Information for TACACS+, page 55
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for TACACS+
The following are the prerequisites for set up and configuration of switch access with TACACS+ (must be
performed in the order presented):
1
Configure the switches with the TACACS+ server addresses.
2
Set an authentication key.
3
Configure the key from Step 2 on the TACACS+ servers.
4
Enable authentication, authorization, and accounting (AAA).
5
Create a login authentication method list.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 39

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English