Cisco Catalyst 250 Series User Manual

PurposeCommand or Action
Displays contents of a binding table.show ipv6 neighbor binding
Example:
Switch# show ipv6 neighbor binding
Step 6
How to Configure an IPv6 Neighbor Discovery Inspection Policy
Beginning in privileged EXEC mode, follow these steps to configure an IPv6 ND Inspection Policy:
SUMMARY STEPS
1.
configure terminal
2.
[no]ipv6 nd inspection policy policy-name
3.
device-role {host | monitor | router | switch}
4.
drop-unsecure
5.
limit address-count value
6.
sec-level minimum value
7.
tracking {enable [reachable-lifetime {value | infinite}] | disable [stale-lifetime {value | infinite}]}
8.
trusted-port
9.
validate source-mac
10.
no {device-role | drop-unsecure | limit address-count | sec-level minimum | tracking | trusted-port |
validate source-mac}
11.
default {device-role | drop-unsecure | limit address-count | sec-level minimum | tracking | trusted-port
| validate source-mac}
12.
do show ipv6 nd inspection policy policy_name
DETAILED STEPS
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Specifies the ND inspection policy name and enters
ND Inspection Policy configuration mode.
[no]ipv6 nd inspection policy policy-name
Example:
Switch(config)# ipv6 nd inspection policy
example_policy
Step 2
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 449
Configuring IPv6 First Hop Security
How to Configure an IPv6 Neighbor Discovery Inspection Policy

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English