Cisco Catalyst 250 Series User Manual

SUMMARY STEPS
1.
enable
2.
configure terminal
3.
time-range time-range-name
4.
Use one of the following:
• absolute [start time date] [end time date]
•
periodic day-of-the-week hh:mm to [day-of-the-week] hh:mm
•
periodic {weekdays | weekend | daily} hh:mm to hh:mm
5.
end
6.
show running-config
7.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Switch(config)# enable
Step 1
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Assigns a meaningful name (for example, workhours) to the
time range to be created, and enter time-range configuration
time-range time-range-name
Example:
Switch(config)# time-range workhours
Step 3
mode. The name cannot contain a space or quotation mark
and must begin with a letter.
Specifies when the function it will be applied to is operational.Use one of the following:
Step 4
• absolute [start time date] [end time date] •
You can use only one absolute statement in the time
range. If you configure more than one absolute
statement, only the one configured last is executed.
•
periodic day-of-the-week hh:mm to
[day-of-the-week] hh:mm
•
You can enter multiple periodic statements. For
example, you could configure different hours for
weekdays and weekends.
•
periodic {weekdays | weekend | daily} hh:mm
to hh:mm
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
164 OL-29048-01
Configuring IPv4 ACLs
Configuring Time Ranges for ACLs

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English