Physical Dimensions
• 12.9 lb (5.8 kg) (Catalyst 2960X-48FPD-L)
• 12.8 lb (5.8 kg) (Catalyst 2960X-48LPD-L)
•
12.7 lb (5.8 kg) (Catalyst 2960X-24PD-L)
• 13.2 (6.0 kg) (Catalyst 2960X-48FPS-L)
• 12.9 lb (5.8 kg) (Catalyst 2960X-48LPS-L)
•
12.8 lb (5.8 kg) (Catalyst 2960X-24PS-L)
•
12.8 lb (5.8 kg) (Catalyst 2960X-24PSQ-L)
Weight
1.75 x 14.50 x 17.5 in. (4.45 x 36.83 x 44.5 cm). Applies to all PoE switches.Dimensions (H x D x W)
11
Power consumption values for the power consumed internally by the switch at 120 VAC 60 Hz. The information is based on the rating of the power supply
(maximum) and does not reflect the actual measured consumption numbers. For the actual power consumption based on measurement, see the data sheet at:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_sheet_c78-728232.html
12
Power rating values for the switch input power.
Table 20: Catalyst 2960X-48TD-L, 2960X-24TD-L, 2960X-48TS-L, 2960X-24TS-L, 2960X-48TS-LL, 2960X-F24TS-LL, Switch
Specifications
Power Requirements
100 to 240 VAC (autoranging)
•
1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-48TD-L)
•
1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-24TD-L)
•
1 to 0.5, 50 to 60 Hz (Catalyst 2960X-48TS-L)
• 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-24TS-L)
•
1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-48TS-LL)
• 1 to 0.5 A,, 50 to 60 Hz (Catalyst 2960X-24TS-LL)
AC input voltage
• +12 V @ 4 A, –53 V @ 8 A (Catalyst 2960X-48TD-L)
• +12 V @ 3 A, (Catalyst 2960X-24TD-L)
•
+12 V @ 5 A, (Catalyst 2960X-48TS-L)
• +12 V @ 4 A, (Catalyst 2960X-24TS-L)
DC input voltage for RPS 2300
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
72 OL-28309-02
Technical Specifications
Specifications for the Catalyst 2960-X Switches
To Next Page
Loading...
Need help?
General
