EasyManuals Logo

Cisco Catalyst 2960-X Series User Manual

Cisco Catalyst 2960-X Series
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
47 W, 161 BTUs per hour (Catalyst 2960X-48TD-L)
32 W, 110 BTUs per hour (Catalyst 2960X-24TD-L)
49 W, 168 BTUs per hour (Catalyst 2960X-48TS-L)
37 W, 126 BTUs per hour (Catalyst 2960X-24TS-L)
55 W, 187 BTUs per hour (Catalyst 2960X-48TS-LL)
37 W, 126 BTUs per hour (Catalyst 2960X-24TS-LL)
Power consumption
13
0.049 KVA (Catalyst 2960X-48TD-L)
0.034 KVA (Catalyst 2960X-24TD-L)
0.051 KVA (Catalyst 2960X-48TS-L)
0.039 KVA (Catalyst 2960X-24TS-L)
0.46 KVA (Catalyst 2960X-48TS-LL)
0.035 KVA (Catalyst 2960X-24TS-LL)
Power rating
14
Physical Dimensions
9.6 lb (4.3 kg) Catalyst 2960X-48TD-L
8.9 lb (4.0 kg) Catalyst 2960X-24TD-L
9.4 lb (4.2 kg) Catalyst 2960X-48TS-L
8.9 lb (4.0 kg) Catalyst 2960X-24TS-L
8.9 lb (4.0 kg) Catalyst 2960X-48TS-LL
8.2 lb (3.7 kg) Catalyst 2960X-24TS-LL
Weight
Dimensions (H x D x W)
1.75 x 11 x 17.50 in. (4.45 x 27.94 x 44.5 cm) All non-PoE switches.
13
Power consumption values for the power consumed internally by the switch at 120 VAC 60 Hz. The information is based on the rating of the power supply
(maximum) and does not reflect the actual measured consumption numbers. For the actual power consumption based on measurement, see the data sheet at:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_sheet_c78-728232.html
14
Power rating values for the switch input power.
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
OL-28309-02 73
Technical Specifications
Specifications for the Catalyst 2960-X Switches

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 2960-X Series and is the answer not in the manual?

Cisco Catalyst 2960-X Series Specifications

General IconGeneral
Operating SystemCisco IOS
Form FactorRack-mountable
RAM512 MB
Model2960-X Series
Ports48 x Gigabit Ethernet
Uplink InterfacesOptional 1G or 10G uplinks
Switching CapacityUp to 160 Gbps
StackingYes, up to 8 switches
Power over EthernetPoE+ (IEEE 802.3at) available on selected models
Dimensions4.4 x 45 x 28.2 cm (1.73 x 17.7 x 11.1 in)
Weight5.4 kg
VLANs4096
Jumbo Frame Support9198 bytes
Power Supply100-240VAC, 50-60 Hz
FeaturesLayer 2 and Layer 3 features, QoS, IPv6 support
SoftwareLAN Base
Operating Temperature0 to 45°C (32 to 113°F)

Related product manuals