Cisco Catalyst 3550

2-7
Catalyst 3550 Multilayer Switch Hardware Installation Guide
78-11358-01
Chapter 2 Installing and Starting the Switch
Preparing for Installation
Verifying Package Contents
Note Carefully remove the contents from the shipping container, and check each
item for damage. If any item is missing or damaged, contact your Cisco
representative or reseller for support. Return all packing materials to the
shipping container, and save it.
The switch is shipped with these items:
• This Catalyst 3550 Multilayer Switch Hardware Installation Guide
• Release Notes for the Catalyst 3550 Multilayer Switch,
Cisco IOS Release 12.1(4)EA1
• Catalyst 3550 Multilayer Switch Documentation CD-ROM
• Cisco Documentation CD-ROM
• AC power cord
• Mounting kit containing:
– Four rubber feet for mounting the switch on a table
– Two 19-inch mounting brackets
– Four Phillips flat-head screws for attaching the brackets to the switch
– Four Phillips machine screws for attaching the brackets to a rack
– One cable guide and one black Phillips machine screw for attaching the
cable guide to one of the mounting brackets
• One RJ-45-to-RJ-45 rollover cable
• One RJ-45-to-DB-9 female adapter
• Cisco Information Packet, containing warranty, safety, and support
information