Cisco Catalyst 9400 Series User Manual

To move the clamp in direction 3b, use a flathead screwdriver or similar device and push the clamp latch
down. Figure 31: Clamp Latch - Detail provides a clearer view of the clamp latch and the direction in which
you have to push the latch to move it in direction 3b.
Figure 30: Positioning the Clamp
Directions in which the clamp can be moved,
towards the power supply and away from it.
3a
and
3b
The end that is fixed to the power supply
module
1
--Clamp Latch2
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
107
Removing and Replacing FRUs
Power Cord Retainer Mechanism

Cisco Catalyst 9400 Series Specifications

General

Series	Catalyst 9400 Series
Form Factor	Rack-mountable
Operating System	Cisco IOS XE
Uplink Options	40G and 100G uplinks
Stacking	Not supported
Layer Support	Layer 2 and Layer 3
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% noncondensing
Power Supply Options	AC and DC power supplies
Redundancy	Power supply, supervisor engine
Modular Slots	7 or 10
MAC Address Table Size	256, 000
Security Features	ACLs, TrustSec, MACsec
Management	CLI, SNMP, NETCONF, RESTCONF, Cisco DNA Center