Cisco Catalyst 9400 Series User Manual

Table 21: Power Requirements and Heat Dissapation - Supervisor Module
Heat Diss. in
BTU / hr.
Current @
240V
Current @
180V
Current @
120V
Current @
90V
DC-Output in
Watts
(Power
Requested)
AC-Input
Power in
Watts
(Power
Allocated)
PID
15161.852.473.704.94400444C9400-SUP-1
15161.852.473.704.94400444C9400-SUP-1XL
15401.882.513.765.0400444C9400-SUP-1XL-Y
Table 22: Power Requirements and Heat Dissipation— Switching Modules
Heat Diss. in
BTU / hr.
Current @
240V
Current @
180V
Current @
120V
Current @
90V
DC-Output in
Watts
(Power
Requested)
AC-Input
Power in
Watts
(Power
Allocated)
PID
2460.300.400.600.806572C9400-LC-48T
2460.300.400.600.806572C9400-LC-48U
7580.931.231.852.47200222C9400-LC-24XS
9101.111.482.222.96240267C9400-LC-48UX
6440.791.051.572.10170189C9400-LC-48S
4550.560.741.111.48120133C9400-LC-24S
2460.300.400.600.806572C9400-LC-48P
2460.300.400.600.806572C9400-LC-48H
Weight Specifications
The total weight of a fully configured chassis will depend on the type of chassis, the number of modules, and
power supplies installed. Use the corresponding weights in the tables below to arrive at the total chassis weight
for your hardware configuration.
Chassis Weights
Weight (Chassis with Fan Tray)PID (add = for spare)
39.0lbs (17.2 kgs)C9404R
63.0 lb (28.58 kg)C9407R
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
158
Specifications
Weight Specifications

Cisco Catalyst 9400 Series Specifications

General

Series	Catalyst 9400 Series
Form Factor	Rack-mountable
Operating System	Cisco IOS XE
Uplink Options	40G and 100G uplinks
Stacking	Not supported
Layer Support	Layer 2 and Layer 3
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% noncondensing
Power Supply Options	AC and DC power supplies
Redundancy	Power supply, supervisor engine
Modular Slots	7 or 10
MAC Address Table Size	256, 000
Security Features	ACLs, TrustSec, MACsec
Management	CLI, SNMP, NETCONF, RESTCONF, Cisco DNA Center