Cisco Catalyst 9400 Series User Manual

CHAPTER 8
Specifications
• Chassis Specifications, on page 143
• Power Supply Specifications, on page 148
• Chassis and Module Power and Heat Values, on page 157
• Weight Specifications, on page 158
Chassis Specifications
Catalyst 9404R Switch Chassis Specifications
Table 9: Physical Specifications of the Chassis
SpecificationItem
10.47 x 17.3 x 16.3 inches (26.53 x 43.94 x 41.40
cms)
Dimensions (H x W x D)
6 RURack units (RU
4
)
Chassis with fan tray—39.0 lbs (17.2 kgs)Weight
4
The chassis height is measured in rack units (RU or just U), where 1 RU or 1 U equals 1.75 in (44.45
mm).
Table 10: Environmental Specifications of the Chassis
SpecificationItem
• 23° to 113°F (-5 to +45ºC), up to 6,000 feet (1800 m)
• 23° to 104°F (-5 to +40ºC), up to 10,000 feet (3000 m)
Ambient temperature and
altitude for normal
operations
5
• 23° to 131°F (-5 to +55ºC), up to 6,000 feet (1800 m)
• 23° to 122°F (-5 to +50ºC), up to 10,000 feet (3000 m)
Nonoperating and storage: -40° to 167°F (-40° to 75°C)
Ambient temperature and
altitude for short-term
6
exceptional conditions
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
143

Cisco Catalyst 9400 Series Specifications

General

Series	Catalyst 9400 Series
Form Factor	Rack-mountable
Operating System	Cisco IOS XE
Uplink Options	40G and 100G uplinks
Stacking	Not supported
Layer Support	Layer 2 and Layer 3
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% noncondensing
Power Supply Options	AC and DC power supplies
Redundancy	Power supply, supervisor engine
Modular Slots	7 or 10
MAC Address Table Size	256, 000
Security Features	ACLs, TrustSec, MACsec
Management	CLI, SNMP, NETCONF, RESTCONF, Cisco DNA Center