Cisco Catalyst 9400 Series User Manual

Figure 13: Installing Shelf Kit L Brackets
What to do next
Mount the shelf brackets on the rack.
Installing the Shelf Brackets
Install the shelf brackets before you install the chassis in the rack. The shelf brackets attach directly to the
rack and help support the weight of the chassis while you secure the L brackets to the rack enclosure.
You have to front-mount the shelf brackets.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
57
Installing the Switch
Installing the Shelf Brackets

Cisco Catalyst 9400 Series Specifications

General

Series	Catalyst 9400 Series
Form Factor	Rack-mountable
Operating System	Cisco IOS XE
Uplink Options	40G and 100G uplinks
Stacking	Not supported
Layer Support	Layer 2 and Layer 3
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% noncondensing
Power Supply Options	AC and DC power supplies
Redundancy	Power supply, supervisor engine
Modular Slots	7 or 10
MAC Address Table Size	256, 000
Security Features	ACLs, TrustSec, MACsec
Management	CLI, SNMP, NETCONF, RESTCONF, Cisco DNA Center