Cisco Catalyst 9400 Series User Manual

Blue beacon LED on the rear panel of the fan tray (always
matches the blue beacon on the front panel of the fan tray)
2Access to remove fan tray from the rear1
Table 1: Catalyst 9404R Switch Features
DescriptionFeature
Chassis model number (add = for spare)—Cisco Catalyst 9400 Series 4 Slot Chassis(C9404R)Product ID
Has four horizontal slots. Slots are numbered 1 (left) to 4 (right).Chassis
Supports 1+1 supervisor module redundancy for integrated resiliency. Supported model numbers (add = for
spare):
• Cisco Catalyst 9400 Series Supervisor 1 Module (C9400-SUP-1)
• Cisco Catalyst 9400 Series Supervisor 1XL Module ( C9400-SUP-1XL)
• Cisco Catalyst 9400 Series Supervisor 1XL-Y 25G Module (C9400-SUP-1XL-Y)
Supervisor modules:
• Must be installed in slots numbered 2 and 3 only.
• Have minimum software release version requirements. Refer to your software release notes for this
information.
See Cisco Catalyst 9400 Series Supervisor Module Installation Note.
Supervisor
modules
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
7
Product Overview
Catalyst 9404R Switch

Cisco Catalyst 9400 Series Specifications

General

Series	Catalyst 9400 Series
Form Factor	Rack-mountable
Operating System	Cisco IOS XE
Uplink Options	40G and 100G uplinks
Stacking	Not supported
Layer Support	Layer 2 and Layer 3
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% noncondensing
Power Supply Options	AC and DC power supplies
Redundancy	Power supply, supervisor engine
Modular Slots	7 or 10
MAC Address Table Size	256, 000
Security Features	ACLs, TrustSec, MACsec
Management	CLI, SNMP, NETCONF, RESTCONF, Cisco DNA Center