Cisco Catalyst 9400 Series User Manual

and are ISO 18000-6C compliant. They operate in the 860-MHz to 960-MHz UHF band. For more
information, see Radio Frequency Identification (RFID) on Cisco Catalyst 9000 Family Switches.
Figure 2: C9400-PWR-3200AC
Power cord retainer5On/ Off rocker switch1
Airflow intake6LEDs.2
Airflow exhaust7Power supply module RFID3
--Release latch4
Features: DC-Input Power Supply
• Has a self-cooling mechanism, with a minimum airflow of 9.5 cubic feet per minute (CFM) at 100 percent
load.
• Has a release latch mechanism on the side of the module to avoid accidental removal of the module.
• Has an On/ Off power button on the front panel. Press for two seconds to switch it on and off.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
20
Product Overview
Power Supply Module Overview

Cisco Catalyst 9400 Series Specifications

General

Series	Catalyst 9400 Series
Form Factor	Rack-mountable
Operating System	Cisco IOS XE
Uplink Options	40G and 100G uplinks
Stacking	Not supported
Layer Support	Layer 2 and Layer 3
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% noncondensing
Power Supply Options	AC and DC power supplies
Redundancy	Power supply, supervisor engine
Modular Slots	7 or 10
MAC Address Table Size	256, 000
Security Features	ACLs, TrustSec, MACsec
Management	CLI, SNMP, NETCONF, RESTCONF, Cisco DNA Center