Cisco Catalyst 9400 Series User Manual

Remaining screws that are mounted when
installing the cable guide—two on each side,
aligning and securing the cable guide and L
bracket to the rack rails.
2Screws that are mounted before the cable
guide is—two on each side, securing the L
bracket to the rack rails.
1
Cable guide installation without shelf brackets is complete.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
69
Installing the Switch
Installing the Cable Guide Without Shelf Brackets

Cisco Catalyst 9400 Series Specifications

General

Series	Catalyst 9400 Series
Form Factor	Rack-mountable
Operating System	Cisco IOS XE
Uplink Options	40G and 100G uplinks
Stacking	Not supported
Layer Support	Layer 2 and Layer 3
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 90% noncondensing
Power Supply Options	AC and DC power supplies
Redundancy	Power supply, supervisor engine
Modular Slots	7 or 10
MAC Address Table Size	256, 000
Security Features	ACLs, TrustSec, MACsec
Management	CLI, SNMP, NETCONF, RESTCONF, Cisco DNA Center