Cisco Catalyst IE9300 - Page 31

Figure 13: Rack-Mounting the Switch
The preceding illustration shows rack mounting for a Cisco IE5000 switch, but the mounting is the same
as for Cisco Catalyst IE9300 Rugged Series Switches.
Note
Before you begin
Attach the brackets to the rack, following instructions in one of the following sections:
• Attach Brackets for 19-Inch Racks, on page 17
• Attach Brackets for 23-Inch Racks, on page 20
• Attach Brackets for ETSI Racks, on page 21
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
23
Switch Installation
Rack-Mount the Switch