Cisco Catalyst IE9300 - Page 88

RangeMeasure
5 percent to 95 percent noncondensingRelative humidity
• Up to 15,000 feet (4572 m) with no temperature derating
• Up to 40,000 feet (12,192 m) with temperature derating down to
25° C
Operating altitude
Up to 40,000 feet (12,192 m)Storage altitude
1.75 in (4.4 cm) clearance top, sides, and bottomThermal spacing
50G at 11ms, half sine and 200G ar 2.11ms, half sineOperational shock
65 to 80G at 9ms, trapezoidalNonoperational shock
The safety certifications apply only to ambient temperatures under 140 F (60 C).
Note
Table 22: Switch Power Requirements
RequirementMeasure
• PWR-RGD-AC-DC-H:
100 to 240 VAC, 50 to 60 Hz
100 to 250 VDC
• PWR-RGD-AC-DC-250:
100 to 240 VAC, 50 to 60 Hz
100 to 250 VDC
• PWR-RGD-LOW-DC-H:
4 to 60 VDC
Nominal input voltage
• PWR-RGD-AC-DC-H:
90 to 264 VAC, 50 to 60 Hz
90 to 300 VDC
• PWR-RGD-AC-DC-250:
90 to 264 VAC, 50 to 60 Hz
90 to 300 VDC
• PWR-RGD-LOW-DC-H:
18 to 75 VDC
Supported input voltage operating range
Cisco Catalyst IE9300 Rugged Series Switch Hardware Installation Guide
80
Technical Specifications
Switch Specifications