Cisco Catalyst IW6300 Series - Access Point Specifications; Technical Specifications

APPENDIX B
Access Point Specifications
• Technical Specifications, on page 69
• Power Consumption Budget, on page 71
Technical Specifications
The following table lists the technical specifications for the Cisco Catalyst IW6300 Heavy Duty Series Access
Points. For detailed specifications, refer to the Cisco Catalyst IW6300 Heavy Duty Series Access Point data
sheet at:
https://www.cisco.com/c/en/us/products/collateral/wireless/industrial-wireless-6300-series/datasheet-c78-742907.html
Table 9: Technical Specifications
IW-6300H-DCW-x-K9IW-6300H-DC-x–K9IW-6300H-AC-x-K9Category
9.7 in. x 11 in. x 5.6 in.
(24.7 cm x 28 cm x 14.2
cm)
9.7 in. x 11 in. x 3.8 in.
(24.2 cm x 28 cm x 9.65
cm)
9.7 in. x 11 in. x 5.6 in.
(24.7 cm x 28 cm x 14.2
cm)
Size
12.7 lbs (5.76 kg)9.8 lbs (4.45 kg)13.3 lbs (6.03 kg)Weight
10.8 to 36Vdc, 5.9A44 to 57VDC, 1.2A100 to 240 VAC,
1.3A,50–60 Hz
Power sources
Four Type N antenna connectors for 2.4 GHz radio and 5 GHz 802.11ac radio
(depends on configuration)
Antenna connectors
• One 100/1000M SFP for WAN
• One 10/100/1000M RJ45 for WAN (UPoE or PoE+ in)
• Two 10/100/1000M RJ45 for LAN (802.3at or 802.3af out)
Ethernet connectors
-40° to 75°C (-40° to 167°F) without solar loading, still airOperating temperature
-40° to 85°C (-40° to 185°F)Storage temperature
10 to 90% noncondensingHumidity
Cisco Catalyst IW6300 Heavy Duty Series Access Point Hardware Installation Guide
69