Cisco Catalyst IW6300 Series User Manual

Absolute Max Power (Watts)Element
19.7Total power budget when using DC power source (44-57VDC)
27.9Total power budget when using DCW power source (10.8-36VDC)
Optional components
30.8
2 clients of 802.3af (PoE) connected
30.01 client of 802.3at (PoE+) connected
1.2Fiber used as backhaul
Total Power Consumption
60
Total power consumption when AC powered (100-240VAC)
51.7Total power consumption when DC powered (44-57VDC)
59.9Total power consumption when DCW powered (10.8-36VDC)
For DC power source (IW-6300H-DC-x-K9), if you want to output 802.3at type 2 PoE out power, DC input
must >=51V. If you want to output 802.3af PoE out power, DC input must >=45V.
Note
Cisco Catalyst IW6300 Heavy Duty Series Access Point Hardware Installation Guide
72
Access Point Specifications
Access Point Specifications

Cisco Catalyst IW6300 Series Specifications

General

Model	Cisco Catalyst IW6300 Series
Category	Wireless Access Point
MU-MIMO	Yes
Ingress Protection	IP67
Power Options	PoE, DC power
Frequency Bands	2.4 GHz and 5 GHz
MIMO	4x4
Input Power	48V DC
Power over Ethernet	802.3at
Mounting	Wall, Pole, Ceiling
Security	WPA3
Management	Cisco DNA Center