Cisco cBR Series - Troubleshooting Tips

PID: , VID: , SN:
NAME: "G1_CUR: Sens 3/6", DESCR: "G1_CUR: Sens"
PID: , VID: , SN:
NAME: "G1_CUR: Vin 3/7", DESCR: "G1_CUR: Vin"
PID: , VID: , SN:
NAME: "G1_CUR: ADin 3/8", DESCR: "G1_CUR: ADin"
PID: , VID: , SN:
NAME: "LB_CUR: Sens 3/9", DESCR: "LB_CUR: Sens"
PID: , VID: , SN:
NAME: "LB_CUR: Vin 3/10", DESCR: "LB_CUR: Vin"
PID: , VID: , SN:
NAME: "LB_CUR: ADin 3/11", DESCR: "LB_CUR: ADin"
PID: , VID: , SN:
NAME: "Temp: CAPRICA 3/12", DESCR: "Temp: CAPRICA"
PID: , VID: , SN:
NAME: "Temp: BASESTAR 3/13", DESCR: "Temp: BASESTAR"
PID: , VID: , SN:
NAME: "Temp: RAIDER 3/14", DESCR: "Temp: RAIDER"
PID: , VID: , SN:
NAME: "Temp: CPU 3/15", DESCR: "Temp: CPU"
PID: , VID: , SN:
NAME: "Temp: INLET 3/16", DESCR: "Temp: INLET"
PID: , VID: , SN:
NAME: "Temp: OUTLET 3/17", DESCR: "Temp: OUTLET"
PID: , VID: , SN:
NAME: "Temp: DIGITAL 3/18", DESCR: "Temp: DIGITAL"
PID: , VID: , SN:
NAME: "Temp: UPX 3/19", DESCR: "Temp: UPX"
PID: , VID: , SN:
Troubleshooting Tips
If any of the Cisco products do not have an assigned PID, the output may display incorrect PIDs and the VID
and SN elements may be missing, as in the following example.
NAME: "POS3/0/0", DESCR: "Skystone 4302 Sonet Framer"
PID: FastEthernet, VID: , SN:
NAME: "Serial1/0", DESCR: "M4T"
PID: M4T , VID: , SN:
In the sample output, the PID is exactly the same as the product description. The UDI is designed for use with
new Cisco products that have a PID assigned. UDI information on older Cisco products is not always reliable.
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
5
Unique Device Identifier Retrieval
Troubleshooting Tips