Cisco cBR Series Configuration Guide

CONTENTS
CHAPTER 1 Unique Device Identifier Retrieval 1
Hardware Compatibility Matrix for Cisco cBR Series Routers 1
Unique Device Identifier Overview 2
Benefits of the Unique Device Identifier Retrieval Feature 2
Retrieving the Unique Device Identifier 3
Troubleshooting Tips 5
Additional References 6
Feature Information for Unique Device Identifier Retrieval 7
CHAPTER 2 Advanced-Mode DOCSIS Set-Top Gateway 1.2 for the Cisco CMTS Routers 9
Hardware Compatibility Matrix for Cisco cBR Series Routers 10
Prerequisites for Advanced-Mode DSG Issue 1.2 10
Restrictions for Advanced-Mode DSG Issue 1.2 10
DSG Configuration File Transfer Operations 10
Multicast Configuration Restrictions 10
NAT for DSG Unicast-only Mapping 11
PIM and SSM for Multicast 11
Subinterfaces 11
Information About Advanced-Mode DSG Issue 1.2 11
DSG 1.2 Clients and Agents 12
FQDN Support 12
DSG Name Process and DNS Query 12
A-DSG Forwarding on the Primary Channel 13
DOCSIS 3.0 DSG MDF Support 13
Source Specific Multicast Mapping 13
How to Configure Advanced-Mode DSG Issue 1.2 14
Configuring the Default Multicast Quality of Service 14
Configuring Global Tunnel Group Settings for Advanced-Mode DSG 1.2 15
Cisco cBR Series Converged Broadband Routers Application—Voice and Video Configuration Guide
iii

Cisco cBR Series Specifications

General

Category	Network Router
Modular Design	Yes
Operating System	Cisco IOS XE
Model Examples	cBR-8, cBR-4
Product Series	cBR Series
Purpose	Converged Broadband Router
DOCSIS Support	DOCSIS 3.1
Redundancy	Yes
Management	Cisco Prime
Product Family	cBR Series
Downstream Frequency Range	Up to 1.2 GHz
Upstream Frequency Range	Up to 204 MHz
Modulation Schemes	QAM
Power Supply	Redundant AC or DC power supplies
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5 to 95% noncondensing