2-6
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
Chapter 2 Preinstallation Requirements
Creating a Site Log
Creating a Site Log
Use a Site Log to keep a record of all actions related to the router. Keep it in an accessible place near
the chassis so that anyone who performs tasks has access to it. Use the Installation Checklist to verify
steps in the installation and maintenance of the router. Site Log entries might include the following
information:
• Installation progress—Make a copy of the Installation Checklist and insert it into the Site Log.
Record information as each procedure is completed.
• Upgrade and maintenance procedures—Use the Site Log as a record of ongoing router maintenance
and expansion. A Site Log might include the following events:
–
Installation of network modules
–
Removal or replacement of network modules and other upgrades
–
Configuration changes
–
Maintenance schedules and requirements
–
Performance of maintenance procedures
–
Observations of intermittent problems
–
Comments and notes
Regulatory Compliance and Safety Information for Cisco
1800 Integrated Services Routers (Fixed) document
received
Declarations of Conformity and Regulatory Information
for Cisco Access Products with 802.11a/b/g and 802.11b/g
Radios document received (wireless routers only)
Product registration card received
Cisco.com contact information label received
Chassis components verified
Initial electrical connections established
ASCII terminal (for local configuration) or
modem
(for remote configuration) available
Signal distance limits verified
Startup sequence steps completed
Initial operation verified
Software image verified
Installation Checklist for Site_____________________________________________
Router Name_______________________________________________________
Task Verified by Date
To Next Page
Loading...
Need help?
General
