CHAPTER
3-1
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
OL-6425-03
3
Chassis Installation Procedures
This chapter describes how to install your Cisco 1800 series fixed-configuration router on a desktop or
on a wall. It includes the following sections:
• Setting Up the Chassis, page 3-1
• Installing the Chassis Ground Connection, page 3-3
Note To see translations of the warnings that appear in this publication, see the Regulatory Compliance and
Safety Information for Cisco 1800 Integrated Services Routers (Fixed) document that accompanied this
device.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Setting Up the Chassis
Warning
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
Statement 1
You can set a Cisco 1800 series fixed-configuration router on a desktop or mount it on a wall. See the
applicable instructions in the following sections.
• Setting a Cisco 1800 Series Fixed-Configuration Router on a Desktop
• Chassis Grounding
• Mounting a Cisco 1800 Series Fixed-Configuration Router on a Wall
To Next Page
Loading...
Need help?
General
