Cisco CP-8832 - Dial an International Number; Get Notified When a Contact Is Available; Calls that Require a Billing Code or Authorization Code

Dial an International Number
You can dial international calls when you prefix the phone number with a plus (+) sign.
Procedure
Step 1
Press and hold star (*) for at least 1 second.
The plus (+) sign is displayed as the first digit in the phone number.
Step 2
Dial the number.
Ten seconds after the last key press, the phone dials the number.
Get Notified When a Contact is Available
If you call someone and their line is busy or they do not answer, you can be notified with a special ringtone
when they are available.
Procedure
Step 1
Press Callback while you are listening to the busy tone or ring sound.
Step 2
Press Exit to exit the confirmation screen.
Step 3
When you hear the ringtone that the person is available, press Dial to place the call again.
Calls That Require a Billing Code or Authorization Code
Your administrator may require that you enter a billing code or authorization code (or both codes) after you
dial a phone number. The billing code, called a Client Matter Code, is used for accounting or billing purposes.
The authorization code, called a Forced Authorization Code, controls access to certain phone numbers.
When a billing code is required, the phone displays Enter Client Matter Code, the dialed number
changes to “********”, and you hear a special tone.
When an authorization code is required, the phone displays Enter Authorization Code, the dialed
number changes to “********”, and you hear a special tone. For security reasons, the phone displays a “*”
instead of the number entered.
When both a billing code and an authorization code are required, you are prompted for the authorization code
first. Then you are prompted for the billing code.
Related Topics
Speed-Dial Numbers, on page 7
Cisco IP Conference Phone 8832 User Guide
15
Calls
Dial an International Number
REVIEW DRAFT - CISCO CONFIDENTIAL