To Next PageTo Next Page
Why do Cisco Conference Phones reset during broadcast storms?
A prolonged Layer 2 broadcast storm (lasting several minutes) on the voice VLAN can cause Cisco Conference Phones to reset or prevent them from making or answering calls. The phones may not function correctly until the broadcast storm ends.
What to do if I can't change the telephone configuration on my Cisco Conference Phone?
If you are unable to change the telephone configuration on your Cisco Conference Phone, it may be because the administrator password settings are locked. You will need to unlock these settings before you can make any configuration changes.
What to do when moving a network connection from Cisco 7832 to a workstation?
If you power your Cisco Conference Phone through the network connection, wait 10 seconds or longer after unplugging the cable from the phone before plugging it into a computer.
What to do if there is a codec mismatch between my Cisco Conference Phone and another device?
If there is a codec mismatch between your Cisco Conference Phone and another device, verify that the other device can handle the codec conversation, or that a transcoder is in place to handle the service. The values of the statistics should match.
How to fix a loopback condition on a Cisco 7832?
If the SW Port Configuration option on your Cisco Conference Phone is set to 10 Half (10-BaseT/half duplex) and the phone receives power from an external power supply, a loopback condition may occur. To resolve this, reenable the port from the switch.
General| Connectivity | Ethernet |
|---|---|
| Audio | Wideband audio (G.722) and enhanced full-duplex speakerphone |
| Power | Power over Ethernet (PoE) Class 2 |
| Protocols | SIP |
| Audio Codecs | G.711, G.722, G.729 |
| Microphones | 360-degree coverage |
| Weight | 1 kg |
| Compatibility | Cisco Unified Communications Manager |
Overview of the Cisco IP Conference Phone 7832, highlighting its microphones and technology.
Details the features supported by the device and notes that not all features may be supported by current configurations.
Lists the specific phone models supported by this user guide.
Details new and changed features introduced in various firmware releases for the phone.
Guides on how to set up the phone, connecting it to the network.
Instructions for signing into a different phone in the network to use your extension.
Procedure for signing into a phone using a guest account when hoteling is enabled.
Explains how to customize phone settings using the phone's web page interface.
Details on setting up and using speed-dial numbers, including dial string characters and rules.
Identifies and describes the physical buttons and hardware components of the Cisco IP Phone 7832.
Lists the special characters available on the phone's keypad for different keys.
Explains how to navigate menus using the navigation bar and select items.
Overview of accessibility features for users with disabilities.
Common issues users might experience and how to address them.
Information on what happens when the phone loses network connection and how to recover.
Guidance on troubleshooting provisioning failure messages on the phone.
Details about the terms and conditions of the Cisco one-year limited hardware warranty.
General information about making calls using the phone.
Instructions for making an emergency call, including location services.
How to call the most recently dialed phone number.
Overview of speed dial functionality for placing calls quickly.
Overview of call forwarding services and how they are indicated.
Overview of transferring active calls to another person.
Information on how to conduct conference calls with multiple participants.
How to record an active call and the associated icons.
Information on IM&P contacts and their presence status.
Overview of Automatic Call Distribution (ACD) features for call center phones.
Steps to sign into the phone and set your status as a call center agent.
Guide to searching contacts across various directories on the phone.
Overview of looking up coworker numbers from corporate directories like LDAP and Broadsoft.
Detailed steps to search for contacts within the BroadSoft directory.
How to enter or edit user credentials for accessing the LDAP directory.
Steps for searching contacts within an LDAP directory.
Information and procedures for managing your personal address book.
Guide to adding new contacts to your personal address book.
Steps to search for contacts within your personal address book.
How to modify existing contact information in your personal address book.
How to view the list of the 180 most recent individual calls and call groups.
Procedure to check your recent call history, including missed calls.
How to view call logs stored on the server or the phone.
Steps to redial or call back a recent call entry.
How to add a new contact entry from a recent call record.
Information about accessing personal voice messages via the phone.
Guide to setting up your personal voicemail phone number on the phone.
Steps to access the voicemail system using the Messages softkey.
General information on phone settings and how they are accessed via the phone or web interface.
How to set a specific ringtone for incoming calls.
Procedure to set up call forwarding services from the phone's menu.
How to enable Do Not Disturb (DND) directly from the phone screen.
Procedure to block your caller identification when making calls.
Procedure to set up or update the voicemail number on the phone.
Instructions for resetting or changing the phone's password for security.
How to enter authentication credentials to resynchronize the phone's provisioning profile.
General safety and performance guidelines for using the phone.
Details the methods for powering the Cisco IP Conference Phone 7832.
Statements required by the Federal Communications Commission (FCC).
FCC statement on RF radiation exposure limits and operating instructions.
Information on the product's cryptographic features and U.S. export regulations.
