• Highlight one of the configured directories.
Step 4 Press Option.
Step 5 Select Edit Settings.
Step 6 Edit the Host Server field.
Step 7 Press Save to apply the change.
Edit Credentials of Your BroadSoft Directory
When your administrator disables the directory individual mode, the phone only displays BroadSoft directory.
When your administrator enables the directory individual mode, the phone displays all enabled directories
with default or customized names. The default names are:
• Enterprise
• Group
• Personal
• Enterprise Common
• Group Common
Only the directory that is enabled by your administrator can display in the Directories screen.
Note
Procedure
Step 1 Press Contacts.
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Do one of the following actions:
• Highlight the BroadSoft directory.
• Highlight one of the configured directories.
Step 4 Press Option.
Step 5 Select Edit Settings.
Step 6 (Optional) Set the Authentication type to Login credentials or SIP credentials.
Step 7 Enter the user credentials based on the authentication type.
• Login credentials: edit the User ID and Password fields.
• SIP credentials: edit the SIP auth ID and SIP password fields.
Step 8 Press Save to apply the change.
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
46
Contacts
Edit Credentials of Your BroadSoft Directory
To Next Page
Loading...
Need help?
General
