Cisco 7832 - Mute Your Call; Hold Calls; Put a Call on Hold; Answer a Call Left on Hold for too Long

Procedure
Step 1 To turn on DND, dial the star code provided by your administrator.
Step 2 To turn off DND, dial the star code provided by your administrator.
Mute Your Call
While you are on a call, you can mute the audio, so that you can hear the other person, but they cannot hear
you.
Procedure
Step 1 Press Mute .
Step 2 Press Mute again to turn mute off.
Hold Calls
Put a Call on Hold
You can put an active call on hold and then resume the call when you're ready.
Procedure
Step 1 Press Hold.
Step 2 To resume a call from hold, press Resume.
Answer a Call Left on Hold for Too Long
Your phone is configured to provide cues that let you know when you have left a call on hold for too long:
• Flashing LED bar
• Visual notification on the phone screen
• Ringing notification on the phone if a hold reminder is configured with phone web page
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
30
Calls
Mute Your Call