Procedure
Press Answer to resume the held call.
Swap Between Active and Held Calls
You can easily switch between active and held calls.
Procedure
Press Swap to switch to the held call.
Forward Calls
If a line is enabled with feature key sync and call forward on it, the call forward icon is displayed next to
the line key label.
There are three call forwarding services:
• Forward all—Forward all incoming calls to a target phone number.
• Forward busy—Forward an incoming call to a target phone number when the line is busy.
• Forward no answer—Forward an incoming call to a target phone number when the call isn't answered.
Verify that your calls are forwarded by looking for the call forwarding icon in the line label or on the
middle top of the phone screen.
Procedure
Step 1 Press Forward.
Step 2 Select one of the following call forwarding services:
• Forward all
• Forward busy
• Forward no answer
Step 3 Do any of the following:
• Enter the target number, to which you want to forward incoming calls from this phone line.
• Press the Contacts softkey and select a contact from your contact directories.
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
31
Calls
Swap Between Active and Held Calls
To Next Page
Loading...
Need help?
General
