Like other devices, a Cisco IP Phone must be configured and managed. These phones encode and decode the
following codecs:
• G.711 a-law
• G.711 mu-law
• G.722
• G722.2 AMR-WB
• G.729a/G.729ab
• G.726
• iLBC
• Opus
• iSAC
Using a cell, mobile, or GSM phone, or two-way radio in close proximity to a Cisco IP Phone might cause
interference. For more information, see the manufacturer’s documentation of the interfering device.
Caution
Cisco IP Phones provide traditional telephony functionality, such as call forwarding and transferring, redialing,
speed dialing, conference calling, and voice messaging system access. Cisco IP Phones also provide a variety
of other features.
Finally, because the Cisco IP Phone is a network device, you can obtain detailed status information from it
directly. This information can assist you with troubleshooting any problems users might encounter when using
their IP phones. You can also obtain statistics about an active call or firmware versions on the phone.
Feature Support
This document describes all the features that the device supports. However, not all features may be supported
with your current configuration. For information on supported features, contact your service provider or
administrator.
Phones Supported in this Document
This document supports these phones:
• Cisco IP Conference Phone 7832 Multiplatform Phones
In this document, the term phone or Cisco IP Phone refers to the above phones.
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
2
Your Phone
Feature Support
To Next Page
Loading...
Need help?
General
