• Switch port config—Indicates speed and duplex of the network port.
View the Phone Status
Procedure
Step 1 Press Settings .
Step 2 Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
• Tx (Packets)—Transmitted packets from the phone.
• Rx (Packets)—Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1 Press Settings .
Step 2 Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Status messages reflect UTC time and are not affected by the timezone settings on the phone.
Note
Step 3 Press Back.
View the Line Status
Procedure
Step 1 Press Settings.
Step 2 Select Status > Phone status > Line status.
You can view the status of each line on the phone.
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
21
Your Phone
View the Phone Status
To Next Page
Loading...
Need help?
General
