The following table describes the buttons on the Cisco IP Conference Phone 7832.
Toggle the microphone on or off. When the
microphone is muted, the LED bar is lit red.
Mute bar1
Indicates call states:
• Green, solid—Active call
• Green, flashing—Incoming call
• Green, pulsing—Held call
• Red, solid—Muted call
LED bar2
Access functions and services.Softkey buttons3
Scroll through menus, highlight items, and select the highlighted
item.
When the phone is idle, press Up to access the recent calls list and
press Down to access the favorites list.
Navigation bar and Select
button
4
Adjust the speakerphone volume (off hook) and the ringer volume
(on hook).
When you change the volume, the LED bar lights white to show the
volume change.
Volume button5
Phone Keypad Characters
The phone keypad allows you to enter letters, numbers, and special characters. You press the Two (2) to Nine
(9) keys to get the letters and numbers. You use the One (1), Zero (0)), Asterisk (*), and Pound (#) keys for
special characters. The following table lists the special characters for each key for the English locale. Other
locales will have their own characters.
Table 1: Special Characters on the Keypad
Special CharactersKeypad Key
/ . @ : ; = ? -_ & %One (1)
(space) , ! ^ ' " |Zero (0)
+ * ~ ` < >Asterisk (*)
# $ £ \ ( ) { } [ ]Pound (#)
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
12
Your Phone
Phone Keypad Characters
To Next Page
Loading...
Need help?
General
