Cisco 7832 - View the Network Status

Here are the descriptions of the remote customization states:
• Open—The phone has booted for the first time and is not configured.
• Aborted—Remote Customization is aborted due to other provisioning, for example, DHCP options.
• Pending—The phone can not download the profile from the EDOS server.
• Custom-Pending—The phone has downloaded a redirect URL from the EDOS server.
• Acquired—In the profile downloaded from the EDOS server, there is a redirect URL for provision
configuration. If the redirect URL download from the provisioning server is successful, this state is
displayed.
• Unavailable—Remote customization has stopped because the EDOS server responded with an empty
provisioning file and the HTTP response was 200 OK.
Procedure
Step 1 Press Settings.
Step 2 Select Status > Product information > Customization.
Step 3 Press Back.
View the Network Status
Procedure
Step 1 Press Settings .
Step 2 Select Status > Network Status.
You can view the following information:
• Network type—Indicates the type of Local Area Netwrok (LAN) connection that the phone uses.
• Network status—Indicates if the phone is connected to a network.
• IPv4 status—IP address of the phone. You can see information on IP address, Addressing type, IP status,
Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
• IPv6 status —IP address of the phone. You can see information on IP address, Addressing type, IP
status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2 of the phone.
• VLAN ID—VLAN ID of the phone.
• MAC address—Unique Media Access Control (MAC) address of the phone.
• Host name—Displays the current host name assigned to the phone.
• Domain—Displays the network domain name of the phone. Default: cisco.com
• Switch port link—Status of the switch port.
Cisco IP Conference Phone 7832 Multiplatform Phone User Guide
20
Your Phone
View the Network Status