Cisco Explorer Series User Manual

Chapter 6 How to Stage DHCTs
74 734375 Rev H
Results:
 The Entitlement Agent displays ISE (1) 0X000000001
 The Sub Expire date is set to 30 days from today
 IPPV / VOD / xOD sites are activated (only if you are using them)
 IPPV cells are not 0 (zero; only if you are using IPPV)
 VOD cells are not 0 (zero; only if you are using VOD)
8 Do the pages display all of the items shown in the results of the preceding step?
 If yes, go to step 9.
 If no, send an instant hit to that DHCT using one of the following methods:
– Using the billing system. The billing system has been set up to send the
DhctInstantHit command to DHCTs. Refer to your billing system
documentation for instructions and specific information.
– Using the DNCS. See Sending an Instant Hit to a DHCT (on page 99) for
more information.
9 Did the instant hit increase the EMM count to the required number?
 If yes, you are finished with this procedure.
 If no, go to DHCT EMM Count Errors (on page 95) for more information.

Cisco Explorer Series Specifications

General

Category	Media Converter
Series	Explorer
Model	Various (e.g., 4642HDC, 8642HDC, 9865HDC)
Type	Set-top box
Input Interfaces	CableCARD, Ethernet, USB
Output Interfaces	HDMI, Component, Composite, S-Video (depending on the model)
Video Resolution	Up to 1080p (depending on the model)
Audio Output	HDMI, Optical, RCA
Power Supply	External power adapter
Dimensions	Varies by model
Weight	Varies by model