Cisco Expressway CE1200 User Manual

Step 3 Check the Hypervisor checkbox, then press Disable.
Lag During Boot up Due to Power Characterization Check
The power characterization test is run only once when you plug in and power up the CE1200. If the power
characterization test continues to run, causing a lag in the boot time, ensure that it is disabled in the CIMC.
To do this:
Step 1 Log in to the CIMC (see Connecting Using CIMC Serial Over LAN).
Step 2 Click the menu arrow in the top-left corner.
Step 3 Go to Chassis > Power management > Power Cap Configuration.
Step 4 Click Disable Power Characterization.
Step 5 Click Save Changes.
Cisco Expressway CE1200 Appliance Installation Guide (14.0)
33
Troubleshooting
Lag During Boot up Due to Power Characterization Check

Cisco Expressway CE1200 Specifications

General

Brand	Cisco
Model	Expressway CE1200
Category	Server
Language	English