Cisco Firepower 4100 Series Hardware Installation Guide

Power Cord Specifications
Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
Only the approved power cords provided with the security appliance are supported. The following table lists
the supported power cords.
Table 8: Supported Power Cords
ConnectorPlugVoltageAmperageDescription
IEC 60320-C15C33 7/7250V10ACAB-AC-EUR
Power cord (Europe)
See Figure 15 below.
IEC 60320-C15NEMA 5-15P125V12ACAB-TA-NA
AC Type A power cord
(North America)
See Figure 16 below.
IEC 60320-C15A.S. 3112-2000250V10ACAB-9K10A-AU
AC power cord
(Australia)
See Figure 17 below.
IEC 60320-C15CEI 23-16/VII250V10ACAB-9K10A-IT
AC power cord (Italy)
See Figure 18 below.
IEC 60320-C15IRAM 2073250V10ACAB-9K10A-AR
AC power cord
(Argentina)
See Figure 19 below.
IEC 60320-C15SEV 1011250V10ACAB-9K10A-SW
AC power cord
(Switzerland)
See Figure 20 below.
Cisco Firepower 4100 Series Hardware Installation Guide
24
Overview
Power Cord Specifications

Cisco Firepower 4100 Series Specifications

General

Brand	Cisco
Model	Firepower 4100 Series
Category	Firewall
Language	English