Cisco Firepower 4100 Series - Front Panel LEDs

Tie wrap clamp6Two slide rails5
Flextronics tie wrap8Artesyn tie wrap7
Ten 8-32 x .375" countersink
screws used to secure the mounting
bracket to chassis (6 screws), and
the cable management brackets to
the mounting brackets (4 screws)
10Two M3X6mm screws used to
secure the inner slide rail to the
chassis
9
Two 10-32 x .375" screws used to
secure the ground lug
12Two slide rail locking brackets11
Two cable management brackets14One ground lug #6 AWG, 90
degree, #10 post
13
Welcome to the Cisco Firepower
4100
115
Serial Number Location
The serial number for the Firepower 4100 series chassis is located on the pull-out label card on the front panel.
Figure 3: Serial Number on 4100 Chassis
Cisco Firepower 4100 Series Hardware Installation Guide
5
Overview
Serial Number Location