Cisco Firepower 4100 Series - 100-Gb Network Module (Two Ports, Single Wide)

Nonhardware (FTW) Bypass Network Modules
The Firepower 4100 supports two nonhardware bypass modules, the 10G and the 40G.
The following figure shows the front panel view of the 10G network module.
Figure 7: Firepower Network Module 10G
Ethernet X/1
2Captive screw/handle1
Ethernet X/5
4
Ethernet X/3
3
Ethernet X/2
6
Ethernet X/7
5
Ethernet X/6
8
Ethernet X/4
7
Network activity LEDs
• Unlit – No connection or port
is not in use.
• Solid amber – No link or
network failure.
• Solid green – Link up.
• Blinking green – Network
activity.
10
Ethernet X/8
9
Cisco Firepower 4100 Series Hardware Installation Guide
10
Overview
Nonhardware (FTW) Bypass Network Modules