Cisco Firepower 4100 Series Hardware Installation Guide

Figure 31: ATA187PWRCORD-SAUD (Saudi Arabia)
Cord set rating: 10A, 250V2Plug: BS1363A/SS1451
Connector: IEC 60320-C133
Hardware Specifications
The following table contains hardware specifications for the Firepower 4100 series security appliance.
Physical
1 RU, fits standard 19-in (48.3-cm) square-hole rackForm factor
Yes, mount rails included (4-post EIA-310-D rack)Rack mountable
1.75 x 16.89 x 29.7 in (4.44 x 42.90 x 75.43 cm)Dimensions (H x W x D)
36 lb (16kg) 2 power supply modules, 2 network modules, 6 fans
30 lb (13.6 kg) no power supply modules, no network modules, no fans
Weight
200 GB (4110 and 4120)
400 GB (4140 and 4150)
For all models, the storage SSD must be installed in SSD slot
1.
Note
SSD
800 GB
For all models, the MSP SSD must be installed in SSD slot
2.
Note
MSP SSD
Cisco Firepower 4100 Series Hardware Installation Guide
34
Overview
Hardware Specifications

Cisco Firepower 4100 Series Specifications

General

Brand	Cisco
Model	Firepower 4100 Series
Category	Firewall
Language	English