EasyManuals Logo
Home>Cisco>Firewall>Firepower 4100 Series

Cisco Firepower 4100 Series Hardware Installation Guide

Cisco Firepower 4100 Series
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Statement 1045Short-circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Warning
Statement 1021SELV Circuit
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.
Warning
Statement 1024Ground Conductor
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available.
Warning
Statement 1040Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1074Comply with Local and National Electrical Codes
Installation of the equipment must comply with local and national electrical codes.
Warning
Statement 19TN Power Warning
The device is designed to work with TN power systems.
Warning
Safety Recommendations
Use the information in the following sections to help ensure your safety and to protect the chassis. This
information may not address all potentially hazardous situations in your working environment, so be alert and
exercise good judgment at all times.
Observe these safety guidelines:
Keep the area clear and dust-free before, during, and after installation.
Keep tools away from walkways, where you and others might trip over them.
Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the
chassis.
Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
Cisco Firepower 4100 Series Hardware Installation Guide
39
Prepare for Installation
Safety Recommendations

Other manuals for Cisco Firepower 4100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Firepower 4100 Series and is the answer not in the manual?

Cisco Firepower 4100 Series Specifications

General IconGeneral
BrandCisco
ModelFirepower 4100 Series
CategoryFirewall
LanguageEnglish

Related product manuals