5. Log on to the Fluidmesh Partner Portal.
6. Click the Plug-ins link.
• The Plug-ins web page will be shown (Figure 51 (page
108)).
Figure 51. Partner Portal Plug-ins page (License code
deactivation)
7. Check the selection check-box to the left of the relevant plug-in
listing.
• The plug-in control buttons will be shown at the bottom of
the web page.
8. Enter the Deactivation code for the plug-in in the Deactivation
Code field (Figure 52 (page 108)).
Figure 52. Partner Portal Plug-ins page (deactivation code
entry)
9. Click the Deactivate button at the bottom of the web page.
Software Plug-Ins
© 2021 Cisco and/or its affiliates. All rights reserved. Page 108 of 132
To Next Page
Loading...
