Figure 36. VIEW MODE SETTINGS dialog (Viewmode
Credentials section)
2. Enter the new user name in the View Mode Username: field.
3. The default password is viewmode. Enter the new password in
the View Mode User Password: field.
NOTE
The new password must be a minimum of eight
characters, and include at least one capital letter and
one number.
4. To show the password as it is being typed, check the Show
Password check-box.
5. Save the Viewmode Credentials settings by clicking the Change
button. Alternatively, clear the settings by clicking the Reset
button.
To change the View Mode settings, do the following steps:
1. Log in to the unit's Configurator GUI with Administrator
credentials. See “Accessing the Cisco FM Ponte kit for device
configuration” (page 37) for more information.
2. Click the -view mode settings link under MANAGEMENT
SETTINGS in the left-hand settings menu (Figure 37 (page 84)).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 83 of 132
To Next Page
Loading...
