Cisco HWIC-4ESW - Page 11

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
How to Configure EtherSwitch HWICs
11
Book Title
DETAILED STEPS
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
vlan database
Example:
Router# vlan database
Enters VLAN configuration mode.
Step 3
vtp server
Example:
Router(vlan)# vtp server
Configures the switch as a VTP server.
Step 4
vtp domain domain_name
Example:
Router(vlan)# vtp domain distantusers
Defines the VTP domain name, which can be up to 32 characters
long.
Step 5
vtp password password_value
Example:
Router(vlan)# vtp password philadelphis
(Optional) Sets a password, which can be from 8 to 64 characters
long, for the VTP domain.
Step 6
exit
Example:
Router(vlan)# exit
Updates the VLAN database, propagates it throughout the
administrative domain, exits VLAN configuration mode, and
returns to privileged EXEC mode.