Cisco HWIC-4ESW - Configuration Examples for EtherSwitch HWICs

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Configuration Examples for EtherSwitch HWICs
106
Book Title
Configuration Examples for EtherSwitch HWICs
This section provides the following configuration examples:
• Range of Interface: Examples, page 106
• Optional Interface Feature: Examples, page 107
• Stacking: Example, page 107
• VLAN Configuration: Example, page 108
• VLAN Trunking Using VTP: Example, page 108
• Spanning Tree: Examples, page 109
• MAC Table Manipulation: Example, page 111
• Switched Port Analyzer (SPAN) Source: Examples, page 111
• IGMP Snooping: Example, page 112
• Storm-Control: Example, page 114
• Ethernet Switching: Examples, page 114
Range of Interface: Examples
• Single Range Configuration: Example, page 106
• Range Macro Definition: Example, page 106
Single Range Configuration: Example
The following example shows all Fast Ethernet interfaces on an HWIC-4ESW in slot 2 being reenabled:
Router(config)# interface range fastEthernet 0/3/0 - 8
Router(config-if-range)# no shutdown
Router(config-if-range)#
*Mar 21 14:01:21.474: %LINK-3-UPDOWN: Interface FastEthernet0/3/0, changed state to up
*Mar 21 14:01:21.490: %LINK-3-UPDOWN: Interface FastEthernet0/3/1, changed state to up
*Mar 21 14:01:21.502: %LINK-3-UPDOWN: Interface FastEthernet0/3/2, changed state to up
*Mar 21 14:01:21.518: %LINK-3-UPDOWN: Interface FastEthernet0/3/3, changed state to up
*Mar 21 14:01:21.534: %LINK-3-UPDOWN: Interface FastEthernet0/3/4, changed state to up
*Mar 21 14:01:21.546: %LINK-3-UPDOWN: Interface FastEthernet0/3/5, changed state to up
*Mar 21 14:01:21.562: %LINK-3-UPDOWN: Interface FastEthernet0/3/6, changed state to up
*Mar 21 14:01:21.574: %LINK-3-UPDOWN: Interface FastEthernet0/3/7, changed state to up
*Mar 21 14:01:21.590: %LINK-3-UPDOWN: Interface FastEthernet0/3/8, changed state to up
Router(config-if-range)#
Range Macro Definition: Example
The following example shows an interface-range macro named enet_list being defined to select
Fast Ethernet interfaces 0/1/0 through 0/1/3:
Router(config)# define interface-range enet_list fastethernet 0/1/0 - 0/1/3
Router(config)#