Cisco HWIC-4ESW - Page 88

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
How to Configure EtherSwitch HWICs
88
Book Title
To reenable spanning tree on the interface, use the no bridge-group bridge-group spanning-disabled
interface configuration command.
Step 6
show running-config
Example:
Router: show running-config
Verifies your entry.
Step 7
copy running-config startup-config
Example:
Router# copy running-config
startup-config
(Optional) Saves your entry in the configuration file.
Command Purpose