Cisco IE 3000 Hardware Installation Guide

1-9
Cisco IE 3000 Switch Hardware Installation Guide
Chapter 1 Overview
Front-Panel Description
For the most up-to-date list of supported SFP models for Cisco Industrial Ethernet switches, see
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_
6981.html#wp138176
For information about SFP modules, see your SFP module documentation and the “Installing and
Removing SFP Transceivers” section on page 2-41. For cable specifications, see Appendix C, “Cable
and Connectors.”
Table 1-2 Maximum Operating Temperature
Type of SFP Module Model
Rugged and Industrial SFPs
–40 to 140°F (–40 to 60°C)
• GLC-SX-MM-RGD
• GLC-LX-SM-RGD
• GLC-FE-100LX-RGD
• GLC-FE-100FX-RGD
• GLC-ZX-SM-RGD
• GLC-BX40-D-I with digital optical monitoring
(DOM) support
• GLC-BX40-DA-I with DOM support
• GLC-BX80-D-I with DOM support
• GLC-BX40-U-I with DOM support
• GLC-BX80-U-I with DOM support
Commercial SFPs
32 to 113°F (0 to 45°C)
• GLC-BX-D with DOM support
• GLC-BX-U with DOM support
• GLC-FE-100LX
• GLC-FE-100BX-D
• GLC-FE-100BX-U
• GLC-FE-100FX
• GLC-FE-100EX
• GLC-FE-100ZX
• CWDM SFP with DOM support
• DWDM SFP with DOM support
• GLC-T
Extended temperature SFPs
23 to 140°F (–5 to 60°C)
• SFP-GE-L with DOM support
• SFP-GE-S with DOM support
• SFP-GE-Z with DOM support
• GLC-SX-MMD with DOM support
• GLC-EX-SMD with DOM support
• GLC-LH-MMD with DOM support
• GLC-ZX-SMD with DOM support

Cisco IE 3000 Specifications

General

Brand	Cisco
Model	IE 3000
Category	Switch
Language	English