Cisco IE 3000 Hardware Installation Guide

1-21
Cisco IE 3000 Switch Hardware Installation Guide
Chapter 1 Overview
AC-Input Power Supply (Optional)
Figure 1-17 displays the power converter.
Figure 1-17 Cisco IE 3000 Switch AC/DC Power Converter
AC-Input Power Supply (Optional)
A 50 W AC-input power supply is available as an option for the IE 3000 switch. The power supply comes
in two styles:
• PWR-IE50W-AC—An AC-input power supply with a terminal block connector for the source AC
cable.
• PWR-IE50W-AC-IEC— An AC-input power supply with an IEC C14 appliance connector for a
detachable AC power cord.
Figure 1-18 shows the AC-input power supply.
The power supply is designed to operate from source AC range of 85 to 264 VAC (115 VAC nominal at
60 Hz or 230 VAC nominal at 50 Hz) and provides 24 VDC to one switch and up to two modules. The
power supply attaches to the side of a switch and provides power to the switch through a preassembled
power cable (PWR-IE3000-CLP=).
1 DC output connector 3 AC/DC input power connector
2 Status LED
DC
O
K
2
4
V
, 2
.
1A
Rtn
O
u
t
(
-)
Pwr
O
u
t
(+
)
12
5
-2
5
0
V
,
1.
2
5
A
M
AX
1
0
0
-240
V~, 50-60H
z
/
N
/
L
/
202314
2
3
1

Cisco IE 3000 Specifications

General

Operating Temperature	-40 to 75°C (-40 to 167°F)
DRAM	128 MB
Flash Memory	32 MB
Uplink Ports	2 x 10/100/1000Base-T or SFP
MAC Address Table Size	8000
Mounting	DIN rail, Wall