Cisco IE 3000 - Page 42

2-8
Cisco IE 3000 Switch Hardware Installation Guide
Chapter 2 Switch Installation
Adding Modules to the Switch
Figure 2-1 shows four sample combinations of the Cisco IE-3000-4TC switch and expansion modules.
A full list of combinations is contained in Table 2-1
Note The switch and expansion module sample combinations illustrated in Figure 2-1 show an IE-3000-4TC
switch. The same sample combinations could also be used with the Cisco IE-3000-8TC switch.
Note Due to power constraints, a configuration that includes either IE 3000 switch and two IEM-3000-8SM
expansion modules is not supported. Also, no expansion modules can be attached to the right of an
IEM-3000-8SM expansion module.