Cisco IE 3000 Hardware Installation Guide

Contents
iv
Cisco IE 3000 Switch Hardware Installation Guide
Finding the Switch Serial Number 3-6
APPENDIX A Technical Specifications A-1
APPENDIX B Installation In a Hazardous Environment B-1
Preparing for Installation B-1
Warnings B-2
North American Hazardous Location Approval B-4
EMC Environmental Conditions for Products Installed in the European Union B-5
Installation Guidelines B-5
Environment and Enclosure Guidelines: B-5
Other Guidelines B-5
Verifying Package Contents B-7
Adding Modules to the Switch B-7
Expansion Module Configurations B-8
Connecting Modules B-12
Installing or Removing the Compact Flash Memory Card B-14
Verifying Switch Operation B-15
Connecting a PC or a Terminal to the Console Port B-16
Connecting the Protective Ground and DC Power B-17
Grounding the Switch B-18
Wiring the DC Power Source B-20
Attach the Power and Relay Connector to the Switch B-25
Attaching DC Power to the PoE Expansion Modules B-26
Running POST B-27
Applying Power to the Switch B-27
Verify POST Results B-28
Disconnect Power B-29
Installing the Switch B-29
Installing the Switch on a DIN Rail B-30
Installing the Switch on a Wall B-34
Installing the Switch in a Rack B-36
Removing the Switch from a DIN Rail or a Rack B-38
Connecting Power and Alarm Circuits B-39
Information about the Sealed Relay Device B-40
Wiring the Protective Ground and DC Power B-40
Wiring the External Alarms B-41
Connecting Destination Ports B-44
Connecting to 10/100 and 10/100/1000 Ports B-44

Cisco IE 3000 Specifications

General

Brand	Cisco
Model	IE 3000
Category	Switch
Language	English