Cisco IE 3000 Hardware Installation Guide

2-59
Cisco IE 3000 Switch Hardware Installation Guide
Chapter 2 Start the Common Industrial Protocol (CIP) management tool. You can manage an entire industrial
Where to Go Next
• Use the CLI to configure the switch as an individual switch from the console. See the switch
command reference on Cisco.com for information about using the CLI.
• Start an SNMP application such as the CiscoView application.
Start the Common Industrial Protocol (CIP) management tool. You can manage an entire industrial
automation system with the CIP-based tools.

Cisco IE 3000 Specifications

General

Brand	Cisco
Model	IE 3000
Category	Switch
Language	English